Hi Tom and the list, I also had a rejected post where I had suggested
setting the radio to 6.25 and programming the frequency lower to what you
want, and then making the necessary adjust mentsw to the tuning knob.





On Mon, 19 Jun 2006, T Behler wrote:

> Hi, all.
>
> Forgive the possible double post to Jeff. ... My first message got rejected
> by the list-serve because it apparently was too long.
>
> 73 de KB8TYJ
>
> ----- Original Message -----
> From: "T Behler" <[log in to unmask]>
> To: "For blind ham radio operators" <[log in to unmask]>
> Sent: Monday, June 19, 2006 2:53 PM
> Subject: Re: entering FRS and GMRS frequencies into THf6A
>
>
> >     Good suggestions, Jeff.
> >
> > I'll keep you and everyone else on the list posted.
> >
> > 73 from Tom Behler: KB8TYJ
> >
> > ----- Original Message -----
> > From: "Jeff Kenyon" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Monday, June 19, 2006 1:51 PM
> > Subject: Re: entering FRS and GMRS frequencies into THf6A
> >
> >
> > > Hi Tom, you are giong to just have to play around and see what you think
> > > may work best.  I would take an FRS radio and key it up or have someone
> > > key it up while you adjust your radio to the level of desire.  That is
> > > what I ended up doing for some narrow banded and FRS stuff in that band,
> > > and in the case of the narrow band stuff it was ajacent to a repeater
> and
> > > I was able to tune in the simplex and even use a DPL, and I never hear
> the
> > > strong repeater that is near that frequency.
>