I will do that...although i have to solder the 8 pin kenwood plug to a few
pig tails to run my studio mike and foot switch....its half way there lol.
No point in testing these kind of mods with a stock mike which only has a
300 to 3000 hertz freq range.
73
Colin, v a6BKX
----- Original Message ----- 
From: "Louis Kim Kline" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Thursday, February 02, 2006 8:02 PM
Subject: Re: ts-2000 dsp mod program


> Hi Colin.
>
> This is interesting.  Please share anything you find out.
>
> 73, de Lou K2LKK
>
>
>
> At 01:20 PM 2/2/2006 -0700, you wrote:
> >Hi list:
> >This is a question to all of you who have used, or who are using the ts
> >2000.
> >I recently came across a peace of software that allows user defined
filter
> >settings.  In other words, you can set up a set of parameters in the
> >software, then send them to the radio and use the "user" setting when
> >selecting dsp filter options.
> >Has anyone played around with this software? It was developed by n3gx
> >specifically for the ts2000.  It says it has no affect on the radio at
> >large, just on the tx and rx filter settings and can easily be removed
and
> >the radio set back to original configuration...the filter settings can be
> >opened up to 3.3K on tx and 4.0K on RX....something only really relevant
to
> >an operator interested in ESSB or increased audio dynamics.
> >73
> >Colin, V A6BKX
>
> Louis Kim Kline
> A.R.S. K2LKK
> Home e-mail:  [log in to unmask]
> Work e-mail:  [log in to unmask]
> Work Telephone:  (585) 697-5753
>