Ya, that's the radio that I'm talking about Dave
Thanks for the help
73
-----Original Message-----
From: For blind ham radio operators [mailto:[log in to unmask]]
On Behalf Of Dave Marthouse
Sent: Monday, September 25, 2006 12:40
To: [log in to unmask]
Subject: Re: Accessibility of the Icom ac2at?
Hi Dan,
I think you may have meant the IC2AT. I don't think Icom ever made an
AC2AT. I am going to assume that you are referring to the IC2AT. If so,
the rig is extremely accessible. The frequencies are selected by using
thumbwheels with clickstops. The only downside is the lack of a tone board
in the stock models. One can be installed however, but the tone selection
can be a problem. You can get a tone board from comspec. There are a few
Comspec models that can select tones through dip switches but they must be
brought out through a hole cut in the rigs case. I hope this helps.
Dave Marthouse N2AAM
[log in to unmask]
----- Original Message -----
From: "Dan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, September 25, 2006 11:38 AM
Subject: Accessibility of the Icom ac2at?