I don't have any use for Programmable memories.
----- Original Message ----- 
From: "Kenneth Lee" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, February 20, 2006 8:51 PM
Subject: Re: another thought on TMV7A problem


Actually the pm memory is very useful.  For example, I like a very soft =
beep
at night, but a louder beep at other times.  Sometimes I like to have
Automatic Intercept Point turned on and other times I want it off.  I =
have
one pm with a high beep another with a low beep and so on. =20

One thing I didn't understand about the pm memory.  The instructions say =
to
have mike control turned off when programming the pm memory.  I'm not =
sure
about this as I don't like using mike control (I have the mike pf key =
set to
"Enter"), but if you use mike control you need to remember this when =
using
the pm feature.

Regards, Ken -N5SWR


-----Original Message-----
From: For blind ham radio operators =
[mailto:[log in to unmask]]
On Behalf Of T Behler
Sent: Monday, February 20, 2006 5:54 PM
To: [log in to unmask]
Subject: Re: another thought on TMV7A problem


    John:

Well, I thought I had the rig in a simple-enough mode as it was, but I =
guess
not.  HI!  HI!

I think my next step is to try to see if someone put a "program memory"
setting in there.  I know the rig has a "program memory" function, but =
never
used it, because it's just something else that I can't necessarily =
control.

Once I get this problem resolved, then I just have to turn the mic DTMF
functions back on, which is easy.

Hopefully, others with TMV7A's might have suggestions.

Thanks to you, John, and all on the list.

Will get it solved one way or the other.

Best 73 from Tom Behler: KB8TYJ

--=20
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 267.15.11/264 - Release Date: =
2/17/2006
=20