Hi Ken,
What you are saying makes good sense. I guess you really need to have stored something in memory 1 before you can do this. I can't seem to locate a
low beep for channel 1, but I don't have anything stored in the memories yet.
Thanks,
Don W6SMB
On Sat, 1 Jul 2006 09:00:13 -0400, Kenneth Lee wrote:
Hi Don, I don't have the 707, but I have the v7 and the programming =
should
be the same for the band limits. From the 707 manual I read there are 6
programmable limit ranges
>From the ICanWorkThisThing.com manual....
#10.5.1 Setting Scan Limits
You can store up to 6 scan ranges in memory channels L1/U1 to L6/U6.
...
To get to these memories you'll need to first go to memory #1, then =
click
your way backward to the scan edge memory you want to program. Make =
sure
the vfo is setup the way you want first, then from memory mode and =
memory
#1, press function, click backward to the scan edge, then press =
MemoryRecall
to store the vfo into this memory.
The voice only announces the frequency, memory channel number and =
PL-tone,
you'll have to count clicks to navigate the menus and other settings.
73, Ken -N5SWR
-----Original Message-----
From: For blind ham radio operators =
[mailto:[log in to unmask]]
On Behalf Of don bishop
Sent: Friday, June 30, 2006 6:59 PM
To: [log in to unmask]
Subject: tm-g707a scan limit question
I've gotten the tm-g707a up and running and the speech working. =20
But I do have a question. Is there any way to set program scan =
frequency
limits? =20
If I locate the lower limit for example, and press f the tuning knob =
emits a
beep at each click but no channel numbers are spoken. =20
I haven't attempted to store anything in the regular memories yet, so =
all
memory channels are currently empty. =20
The dimmer key will speak frequency readout, but nothing is spoken when =
tune the tuning knob either in vfo mode or when within a menu or memory
setup. =20
Did I forget to set something to get speech in these areas? If so, what =
do
I need to set now?
Thanks,
Don W6SMB
--=20
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.394 / Virus Database: 268.9.7/379 - Release Date: 6/29/2006
=20
__________ NOD32 1.1635 (20060630) Information __________
This message was checked by NOD32 antivirus system.
http://www.eset.com
|
