hmmm, when programming memories I guess it doesn't have the low beep for
channel 1. I thought it did, it will when you put things in memory though. I
just checked, when programming things in to memory it doesn't have the low
beep. I thought it did. Must have been thinking about another radio.
----- Original Message -----
From: "don bishop" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, July 01, 2006 2:23 PM
Subject: Re: tm-g707a scan limit question
> Hi Ken,
>
> What you are saying makes good sense. I guess you really need to have
> stored something in memory 1 before you can do this. I can't seem to
> locate a
> low beep for channel 1, but I don't have anything stored in the memories
> yet.
>
> Thanks,
>
> Don W6SMB
>
>
> On Sat, 1 Jul 2006 09:00:13 -0400, Kenneth Lee wrote:
>
> Hi Don, I don't have the 707, but I have the v7 and the programming =
> should
> be the same for the band limits. From the 707 manual I read there are 6
> programmable limit ranges
>>From the ICanWorkThisThing.com manual....
> #10.5.1 Setting Scan Limits
> You can store up to 6 scan ranges in memory channels L1/U1 to L6/U6.
> ...
>
> To get to these memories you'll need to first go to memory #1, then =
> click
> your way backward to the scan edge memory you want to program. Make =
> sure
> the vfo is setup the way you want first, then from memory mode and =
> memory
> #1, press function, click backward to the scan edge, then press =
> MemoryRecall
> to store the vfo into this memory.
>
> The voice only announces the frequency, memory channel number and =
> PL-tone,
> you'll have to count clicks to navigate the menus and other settings.
>
> 73, Ken -N5SWR
>
>
> -----Original Message-----
> From: For blind ham radio operators =
> [mailto:[log in to unmask]]
> On Behalf Of don bishop
> Sent: Friday, June 30, 2006 6:59 PM
> To: [log in to unmask]
> Subject: tm-g707a scan limit question
>
>
> I've gotten the tm-g707a up and running and the speech working. =20
>
> But I do have a question. Is there any way to set program scan =
> frequency
> limits? =20
>
> If I locate the lower limit for example, and press f the tuning knob =
> emits a
> beep at each click but no channel numbers are spoken. =20
>
> I haven't attempted to store anything in the regular memories yet, so =
> all
> memory channels are currently empty. =20
>
> The dimmer key will speak frequency readout, but nothing is spoken when =
>
> tune the tuning knob either in vfo mode or when within a menu or memory
> setup. =20
>
> Did I forget to set something to get speech in these areas? If so, what =
> do
> I need to set now?
>
> Thanks,
>
> Don W6SMB
>
> --=20
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.394 / Virus Database: 268.9.7/379 - Release Date: 6/29/2006
> =20
>
>
>
>
> __________ NOD32 1.1635 (20060630) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>
|