Hi Steve,

You hit it on the head!  I stumbled onto your solution just ahead of
receiving your message.  Now why does the AGC make a difference on CW
but not on sideband?  Oh well, it's working now and that's the
important thing I guess.

de AF6y, Dave


At 06:49 AM 11/11/2005, you wrote:

>Dave,
>
>I have a 2000, not the 480, but this may work for you:  Try toggeling the
>AGC on and off and see if  your s meter  comes back at one position.  Not
>sure if the 480 tells you if AGC is on or off or if you have to do the trial
>and error thing.
>
>
>73, Steve KW3A
>
>----- Original Message -----
>From: "David R. Basden" <[log in to unmask]>
>To: <[log in to unmask]>
>Sent: Thursday, November 10, 2005 10:05 AM
>Subject: TS-480 S-Meter Readings on CW
>
>
> > I'm a new TS-480 owner and have discovered that the voice readout for
> > the S-meter is always 0 on CW.  On sideband it is what you would
> > expect even for a CW signal.  Is there a way to get an S-meter
> > readout in CW mode?  I have the 500Hz filter installed and in use on CW.
> >
> > de AF6Y, Dave
> >
> >
> > --
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.1.362 / Virus Database: 267.12.8/163 - Release Date: 11/8/2005
> >
> >
> >
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.362 / Virus Database: 267.12.8/166 - Release Date: 11/10/2005
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.362 / Virus Database: 267.12.8/166 - Release Date: 11/10/2005


--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.362 / Virus Database: 267.12.8/166 - Release Date: 11/10/2005