This sounds like an overheating problem. With the case open check to make
sure all the fans are operating. Then check to make sure the CPU heat sink
is securely attached (using thermal gel ?). Are the cables blocking air
flow?
Hope this helps.
Tom Mayer
----- Original Message -----
From: "Clay Shipley" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, March 05, 2005 12:30 PM
Subject: [PCBUILD] At wits end
I recently finished my first complete build from the ground up. I am using
a ASUS P4R800V-Deluxe motherboard, Pentium 4 3.0 GHz processor, with a
Western Digital 40 GB IDE HDD. I also have a DVD ROM, CD-R/RW and Floppy
from my old Gateway computer in it. It's powered by a 450W power supply.
At first I ran into some grounding problems with the board contacting the
case, but resolved those, and have the computer booting up and posting fine.
I originally had 2 256 MB PC3200 DDR RAM from AMPO made from Wintec in the
system. I booted it up with the Windows ME startup disk, ran fdisk and
format on the HDD just fine, I then inserted my Windows XP Update disk into
the DVD-ROM drive and restarted it, it read the CD, began to load the files
and when it got to the point when it said "starting windows", the computer
just shut off without warning. I trie
d the same thing with the CD in the CD-R/RW drive and the same thing
happened. I then tried it with the jumper on the HDD on master, cable
select, took the jumper completely off, no change. I downloaded memtest86+
and made a boot disk out of it and ran that, and 1 or 2 seconds after the
program loaded and began running it the computer shut off. I tried it with
each ram stick in the DIMM slot individually and it shut off sooner than it
had with both. Though, when I start up the computer and enter the BIOS it
reads the RAM and displays the correct amount of memory. This lead me to
believe perhaps the RAM was bad. I then went out today and bought a PNY
512MB PC3200 DDR400 RAM and tried that running the memtest86+. The test ran
a couple seconds longer than it had with the other two sticks, but the
computer still shut off. I tried it in each DIMM slot and ran the test for
each one and for some slots it ran longer than others, but inevitably at
some point it shut off. I'm at my wits e
nd and have no idea what to do, PLEASE HELP ME!!!!!!!! Thank you so
much!!!! -Clay
The NOSPIN Group has added a new feature on our website,
web based bulletinboard for questions and answers:
Visit our sister website at http://nospin.com
PCBUILD maintains hundreds of useful files for download
visit our download web page at:
http://freepctech.com/downloads.shtml
|
