Thanks, Brian, but that's not it, the ctcss is not on, there is hiss when I
open the squelch, but when I transmit, can not hear the received signal.
And for those who can tell me the difference between a partial and full
reset, I do not understand the difference, one says a/b key and the other
says a=b, so what combination do I push? for either?
Thanks again.
Fred Olver [log in to unmask]
----- Original Message -----
From: "K5IN" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, March 26, 2006 1:07 PM
Subject: Re: ts2000 question
> sounds to me like you have ctcss turned on. hit the 6 key with the
> squelch
> open and see if you can again hear. Especially if it is transmitting on
> fm
> and not receiving. I don't know of anyway to reverse the a and b
> transmitters.
>
> Brian, k5in
> ----- Original Message -----
> From: "Fred Olver" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, March 26, 2006 5:32 AM
> Subject: ts2000 question
>
>
>> Morning guys,
>>
>> I find the a rcvr in my ts2k wants to rcv but does not, I tried toing a
>> partial and full reset but in reading the manual can't tell the
>> difference
>> in what is to be done, also, the radio is transmitting on the a rcvr, but
>> not rcving, this is true, at least on the two meter bands and 440
>> megahertz
>> bands. Also, think may have changed the rx so that the a rcvr is the b
>> rcvr, how to change back?
>>
>> Fred Olver [log in to unmask]
>
|