BULLAMANKA-PINHEADS Archives

The listserv where the buildings do the talking

BULLAMANKA-PINHEADS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Rudy Christian <[log in to unmask]>
Reply To:
The listserv which takes flossing seriously! <[log in to unmask]>
Date:
Sun, 24 Apr 2005 21:13:00 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (81 lines)
Deb n'all,

Here's the high-tech (opposite of free) solution that has been pretty
popular http://www.loghomes.com/loghomedepot/permachink.htm, but I like
the cow pie suggestion better.

Portland based mortar is not compatible and holds water against the
logs. The log cabin at Greenfield Village was a perfect example of what
can be the result.

I'm not sure if the limey's have any suggestions but the cabin at the
site we are using for a workshop in June outside of Fort Collins has a
cabin which has would splits (short thick split pieces of wood) stacked
at an angle in the space between the logs with a parge of what seems to
be gauged lime plaster. I have also seen this used in a "piece on piece"
cabin here in Wayne County.

Sounds like a fun project. Enjoy!

Rudy

-----Original Message-----
From: The listserv which takes flossing seriously!
[mailto:[log in to unmask]] On Behalf Of
Hammarberg, Eric
Sent: Sunday, April 24, 2005 1:56 PM
To: [log in to unmask]
Subject: Re: [BP] log cabin chinking material

I'm no expert but I recall hearing about chinking replacement
incorporating
lath as a reinforcement. I also recall hearing about elastomeric
caulking
like materials developed specifically for chinking replacement back in
the
1980's or early 90's. I do not remember if the elastic materials were
polyurethane, silicone or other. Good luck,
Eric

 -----Original Message-----
From:   [log in to unmask] [mailto:[log in to unmask]]
Sent:   Sun Apr 24 10:41:35 2005
To:     [log in to unmask]
Subject:        Re: [BP] log cabin chinking material

Deb,
My guess is you get lousy bond between chinking mortar and logs; that
this
is a condition inherent in chinking logs and ALWYS needed a lot of
maintenance.  The fact that your chinking is wider at the front than the
back doesn't help. My first thought was to tell you to drive 10,000
nails
in, and maybe create a matrix with wire to hold the chinking in place.
Another possibility would be to somehow rut out the logs so the chinking
is
wider at the back than the front and keys itself in.

Have fun.

Ralph

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
The information in this email and any attachments may contain
confidential information that is intended solely for the
attention and use of the named addressee(s).  This message or
any part thereof must not be disclosed, copied, distributed or
retained by any person without authorization from the addressee.
If you are not the intended addressee, please notify the sender
immediately, and delete this message.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

--
To terminate puerile preservation prattling among pals and the
uncoffee-ed, or to change your settings, go to:
<http://maelstrom.stjohns.edu/archives/bullamanka-pinheads.html>

--
To terminate puerile preservation prattling among pals and the
uncoffee-ed, or to change your settings, go to:
<http://maelstrom.stjohns.edu/archives/bullamanka-pinheads.html>

ATOM RSS1 RSS2