Hi,
I didn't have to change any of the jumpers. Apparantly, they were set for
kenwood at the factory.
73,
Clarence
----- Original Message -----
From: "Louis Kim Kline" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Saturday, July 23, 2005 12:46 PM
Subject: Re: MFJ 993 and TS2000S
> Hi Clarence.
>
> Was your interface jumpered to get power from the rig, or did you have to
> change that?
>
> --Lou K2LKK
>
> At 10:17 AM 7/23/2005 -0400, you wrote:
>>Hello,
>>Yes there are jumpers that need to be set. When mfj delivered mine, the
>>jumpers were set. I checked the settings with the manual to be sure of
>>this. It isn't hard to do. My xyl read the manual and checked them
>>against
>>it. There is also a jumper to tell the interface to get the power for the
>>tuner from the rig or not. I suspect that the 2000 is capable of suplying
>>the 12 vdc to the tuner.
>>The setup really works nice. When you have it all hooked up, the tune
>>button on the front of the radio will control the tuner.
>>If I can help, let me know.
>>73,
>>Clarence
>>
>>----- Original Message -----
>>From: "Louis Kim Kline" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Saturday, July 23, 2005 12:04 AM
>>Subject: Re: MFJ 993 and TS2000S
>>
>>
>> > Hi Clarence.
>> >
>> > A friend was looking at the manual for the Kenwood-Yaesu interface and
>> > indicated that there are some jumpers that have to be set for the radio
>> > being used, so I guess I'm at a stand still until I can get together
>> > with
>> > someone sighted.
>> >
>> > 73, de Lou K2LKK
>> >
>> > At 08:03 PM 7/22/2005 -0400, you wrote:
>> >>Hello,
>> >>I don't know about the 2000, but with the 570 you don't have to do
>> >>anything.
>> >>I just plugged in the interface cable.
>> >>73,
>> >>Clarence
>> >>
>> >>----- Original Message -----
>> >>From: "Louis Kim Kline" <[log in to unmask]>
>> >>To: <[log in to unmask]>
>> >>Sent: Thursday, July 21, 2005 8:52 PM
>> >>Subject: MFJ 993 and TS2000S
>> >>
>> >>
>> >> > Hi.
>> >> >
>> >> > Has anyone operated the Kenwood TS2000S with the MFJ993 Auto Tuner
>> >> > yet?
>> >> > I
>> >> > have the Kenwood interface for the MFJ 993, and I'm wondering if
>> >> > there
>> >> > is
>> >> > anything I need to do to the Kenwood TS2000S (other than plug in the
>> >> > interface and run the coax to the tuner) to let the Kenwood TS2000S
>> >> > know
>> >> > that there is an external tuner that it should use in place of the
>> >> > internal
>> >> > one when on antenna 1.
>> >> >
>> >> > I haven't had a chance to get to MFJ's web site to see if the
>> >> > instructions
>> >> > are available up there or if I'll have to scan them. Does anyone on
>> >> > the
>> >> > list know?
>> >> >
>> >> > 73, de Lou K2LKK
>> >> >
>> >> >
>> >> >
>> >> > Louis Kim Kline
>> >> > A.R.S. K2LKK
>> >> > Home e-mail: [log in to unmask]
>> >> > Work e-mail: [log in to unmask]
>> >> > Work Telephone: (585) 697-5753
>> >
>> > Louis Kim Kline
>> > A.R.S. K2LKK
>> > Home e-mail: [log in to unmask]
>> > Work e-mail: [log in to unmask]
>> > Work Telephone: (585) 697-5753
>
> Louis Kim Kline
> A.R.S. K2LKK
> Home e-mail: [log in to unmask]
> Work e-mail: [log in to unmask]
> Work Telephone: (585) 697-5753
|
