along as you run the cable from the radio to the tuner these days, you need
do nothing else if it interfaces with the radio, if it doesn't then you need
to make sure the internal tuner is off but I think that one plugs in to the
tuner port on the back of the radio as well ad the Coax connection in which
case you don't even need to do that since it will disable it for you and the
same tune button for the internal tuner will or should, work that tuner for
you.
----- Original Message -----
From: "Tom Karnes" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, July 22, 2005 5:02 PM
Subject: Re: MFJ 993 and TS2000S


Louis,
On my Kenwood 850 there is a switch on the back panel that needs to be
switched to "ext" to disable the internal tuner. The switch is somewhat
recessed and may need  a fingernail file to move it.
Tom K6FUN

On Thu, 21 Jul 2005, Louis Kim Kline wrote:

> Hi.
>
> Has anyone operated the Kenwood TS2000S with the MFJ993 Auto Tuner yet?  I
> have the Kenwood interface for the MFJ 993, and I'm wondering if there is
> anything I need to do to the Kenwood TS2000S (other than plug in the
> interface and run the coax to the tuner) to let the Kenwood TS2000S know
> that there is an external tuner that it should use in place of the
> internal
> one when on antenna 1.
>
> I haven't had a chance to get to MFJ's web site to see if the instructions
> are available up there or if I'll have to scan them.  Does anyone on the
> list know?
>
> 73, de Lou K2LKK
>
>
>
> Louis Kim Kline
> A.R.S. K2LKK
> Home e-mail:  [log in to unmask]
> Work e-mail:  [log in to unmask]
> Work Telephone:  (585) 697-5753
>