Jerry,

It's important to note that memories that have never been written don't
appear as you rotate the tuning knob.  However, it is still possible to
select any memory for writing.  For example, suppose you have written to
memory 9 and now want to store something in memory 10, which up to now has
not been written.  Press the Memory key and select memory 9, either by
rotating the tuning knob or directly entering the memory number from the
keyboard.  Then switch to the VFO where, presumably, you have stored the
data you want to write.  Press the Function key and rotate the tuning knob
clockwise one click.  You are now ready to write to memory 10 by pressing
the Memory key.  Note that you could have written to another higher memory
by simply rotating the tuning knob clockwise the appropriate number of
clicks.  Similarly, you could have selected a lower memory by rotating the
knob counter-clockwise.  You can even access the Priority, Information, and
scanning range memories by rotating the tuning knob counter-clockwise
beyond memory 0.  I'm not certain of the order, but I believe the
information memories are closest to 0, and are in decreasing sequence.  I
find it much easier to change these memories using the software, although I
have successfully done so using the method described above.

Steve

On Tuesday 10/19/04 23:21 Jerry Neufeld wrote:

>Hello folks.
>
>What would I do without this list! I now have my th-f6a and like everything
>I've seen. I have not been able to figure out, however, how I can write
>repeater frequencies and related data to sequencial memories. From what I
>see, memory storage is not incremental. Nor would I have expected it to be.
>Memory 01 simply gets overwritten. Is there a way to either specify a
>particular memory via the keypad or increment a memory location by 1 to
>store a new location? And, are the memories independent of bands?
>
>Thanks to any who knows and who is willing to share their wisdom.
>
>Jerry