Hi Mike, this is from a copy of the manual I have. Let me know if you
want a copy of the whole thing. It is a .doc file and is about 59 megs.
USING THE PRIORITY-FREQUENCY MEMORIES
The transceiver has three priority-frequency memories. The transceiver
can
periodically scan these frequencies during manual, calling-frequency
memory, or standard memory operation. Follow these steps to store a
frequency in the priority-frequency memories.
1. Press press VF and tune to the frequency you want to save.
2. Press F and rotate TUNE until either P1, P2, or P3 appears to the
left
of the tuned frequency.
3. If the frequency is a repeater that requires subaudible tone access
or
if you want to use subaudible tone squelch with this frequency, press
F+T-SQL so that T-SQL appears on the display.]
4. Press F+M-WR for at least 1 second to store the tuned frequency in
the
selected priority-frequency memory.
5. To change the frequency separation or subaudible tones, press PR and
rotate TUNE to select the priority-frequency memory you want to
change.
Then, refer to steps 6 through 12 under "Using the Calling-Frequency
Memory." Each priority frequency can have different settings.
To set the transceiver to a priority frequency, press PR. Then rotate
TUNE, press /\SC, \/SC, 1, 2, 3, to select one of the three memories.
To have the scanner check the priority-frequency memories for activity,
press VF. Then, press F+P-SC for at least 1 second. The transceiver
checks the priority-frequency memories every 4 seconds. To change the
priority scan time, see "Setting the Priority Scan Time."
To continuously scan the three priority frequency memories, press PR.
Then, press and hold down /\SC or \/SC at least 1 second,
NOTE: You must store more than one priority frequency in memory to
continuously scan priority-frequency memories.
HTH:
J. J.
________________________________________________________________
Get your name as your email address.
Includes spam protection, 1GB storage, no ads and more
Only $1.99/ month - visit http://www.mysite.com/name today!
|