Yes, if you use a good pair of sealed headphones, you can tell the difference
if you change heads on your microphone or adjust the DSP filter for
transmitted audio in Menu 21, and you can tell the difference in bandwidth
when adjusting the filter width in Menu 22 from 2.0KHz to 3.0KHz.

Steve, K8SP
----- Original Message -----
From: "Jerry Neufeld" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, July 23, 2004 5:02 PM
Subject: Re: monitoring one's own signal


Hello Steve.

As you doubtless know, it was very rare, in equipment of ten to twelve years
ago, to find receivers that would allow one, through headphones, to
carefully monitor the quality of cw or audio signals, very rare indeed.
Although I had seen the word, monitor, in the list to which you refer, I had
no way to know, without using the transceiver itself or without having a
detailed description of the monitor feature, exactly what the rig gives us
access to.
If one broadens the response of a microphone, for example, or subtly changes
the keying contours, if such is possible, can one hear what the actual
signal will sound like to listeners? If so, it is a very valuable addition
to more recent equipment.

Thanks.

Jerry

----- Original Message -----
From: "Steve" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, July 23, 2004 3:54 PM
Subject: Re: monitoring one's own signal


> Yes, Jerry, look at the keyboard description chart.  Function key then
power
> key will adjust monitor level.
>
> ----- Original Message -----
> From: "Jerry Neufeld" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Thursday, July 22, 2004 11:21 PM
> Subject: monitoring one's own signal
>
>
> Hi folks.
>
> I'm wondering whether or not my ts2000, soon to arrive, allows for
> monitoring the sound of the audio component of the signal during output.
If
> not, as I suspect, I will keep my ts440 for that and other check-out
> purposes.
>
> Thanks.
>
> Jerry