hi,
well I am going to buy a adapter at a radio store since I don't have a 13.8
volt adapter. I have one where you turn a nob and it changes the voltage
current.
As for antenna's, i want to use an antenna hung out of my window. Since this
is 2 meters, its not a big deal to get an antenna
73:
tomi
kd8bwf
----- Original Message -----
From: "Colin McDonald" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, July 19, 2005 2:05 PM
Subject: Re: getting a new radio
> yeh, thats what i refered to in my email...but those are pricy and heavy
> and
> fairly uncommon...and rather unnecesary.
> actually, i think most large 13.8 VDC power supplies have a variable
> control
> inside to adjust the voltage between 10 and 16 volts....although, i did
> have
> a variable radio shack 12 amp power supply for a while...had a big knob on
> the front to vary the voltage and a big meter to tell you the voltage and
> supposedly the amperage.
> 73
> Colin, V A6BKX
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Tuesday, July 19, 2005 2:43 PM
> Subject: Re: getting a new radio
>
>
>> they make big variable voltage power supplies but they're kind of pricy.
>> I
>> was wondering the same thing though.
>> ----- Original Message -----
>> From: "Colin McDonald" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Tuesday, July 19, 2005 3:47 PM
>> Subject: Re: getting a new radio
>>
>>
>> tomi:
>> you said you are not getting a power supply because you already have one
>> that is a variable voltage type....tell me, is this an actual 13.8 volt
> high
>> current power supply?
>> the only sort of variable voltage power supplies i have ever run across
> are
>> the kind you plug straight into the wall and that supply about 5 to 800
>> milliamps of current.
>> To properly use an amateur transceiver you would need at least 3 amps of
>> current at 13.8 volts and that is using lower power settings.
>> Even for receive, you would likely need something better then the wall
>> power supply type.
>> Of course, you might have one of the big variable voltage supplies too.
>> Just thought i would make sure before you get your radio and find out you
>> can't power it.
>> Also, just out of curiosity, what type of antenna will you be using?
>>
>> 73
>> Colin, V A6BKX
>> ----- Original Message -----
>> From: "tomi" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Monday, July 18, 2005 11:30 AM
>> Subject: getting a new radio
>>
>>
>> > hi list,
>> >
>> > Well I have talked to Avery Finn, the guy that handles equipment lones
> at
>> > handihams.
>> >
>> > He told me that they have a kenwood tm 261 that can be used on vhf, uhf
>> and
>> > includes repeater pl tones.
>> >
>> > Did any of you have or had this moddel? if so, how is it like and
>> > what's
>> the
>> > qualaty of the model? Meaning, is it good, etc.
>> >
>> > I
>> > am not getting an ac power suply for it since it would be too heavy.
> Nor
>> an
>> > antenna. I have a power suply that can switch voltages, so I'm sure
>> that'll
>> > help.
>> >
>> > 73:
>> > Tomi
>> >
>> > kd8bwf
>> >
>>
>
|
