I found an adapter in my junk box and got this fan to spin, but still no
joy.
I then removed everything from the board and got no beeps.
I was convinced at this point, but then I found a spare P4 chip, which I
installed, to no avail.
I pronounced the board at 7:15 AM 6/20/06.
Thomas Mayer wrote:
> The motherboard could see that the CPU fan is not spinning and therefor,
> not try to POST. Can you try a known good CPU fan that will work with
> the heat sink?
>
> Also, although you have probably done it, check to make sure all chips
> including the BIOS are firmly seated on the motherboard. And, possibly
> something that was loose in the case (like an errant screw) is now under
> the motherboard and creating a short.
>
> Just a few thoughts. Hope this helps.
>
>
PCBUILD's List Owners:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>