It sounds as if you have set the radio to receive CTCSS and if none of the machines have CTCSS on
their outputs then you'll not hear the output.
Press the 7 key until you hear a low beep this will turn the receive tone off. To transmit a tone,
tap the 7 key once.
I suspect you may want to reprogram your memories. Do it with the software if you can.
Ray T. Mahorney
WA4WGA
----- Original Message -----
From: "Walt Sebastian" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, June 29, 2004 07:38
Subject: THF6A PROBLEM
Hi guys,
I now have the Kenwood THF6A. I have a few repeaters etc. programmed in.
The problem is that I have gotten it into a strange mode. If I key a
repeater or even want to listen to it, I have to hold the lower button under
the PTT button that opens the squelch. How can I fix it. I don't want to
walk around holding that button. Thanks and 73.
Walt
WA4QXT
New London CT
[log in to unmask]
---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.712 / Virus Database: 468 - Release Date: 6/29/2004