Subject: | |
From: | |
Reply To: | |
Date: | Tue, 16 Mar 2004 06:26:25 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Can you get to a command prompt, run "ipconfig /all >temp.txt", and send
us the temp.txt file that results (paste it into the message body)? That
will help us see if the connection is functioning and you're getting a valid
IP address and DNS settings. If those are okay, we can have you try "ping"
to establish network connectivity/reachability. Once all of those check
out, then we're ready to consider whether it could be a problem with IE
itself.
David Gillett
On 14 Mar 2004 at 15:44, bobwarasila wrote:
> I tested my networking connection with a direct connection to my cable modem
> (bypassed the router) and still can't get Explorer to connect to the outside
> world. The device manager says the NIC is OK and "functioning properly".
> Is there some other way I can test functionality?
>
> Bob Warasila
>
>
> > Whenever you install or change NIC drivers, Win98SE assumes that you
> also
> > need to install networking support files (from the OS CD). After the
> first
> > time, it's probably wrong about that, but at least the first time, if
> > they're not where it looks for them by default, you need to navigate
> around
> > on the CD until it finds them. (The situation is a little analogous to
> the
> > early days with CD-ROM drives, where you needed both a drive-specific low-
> > level driver, and an upper-level driver that added CD-ROM support to the
> OS,
> > but in this case it's the NIC driver and networking support.)
>
> PCBUILD maintains hundreds of useful files for download
> visit our download web page at:
> http://freepctech.com/downloads.shtml
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|