Yes, the com port is enabled.

I changed it to com 1.

I have a serial to usb adapter and, it was working and now the program is
not communicating with the ht.

The program has com 1 through com 4.

When I check the device information it says that the adapter is on com 7
and, I can't find any way of changing it.

I am becoming more and more frustrated.

Please help.

73 De Anthony W2AJV
[log in to unmask]
ECHOLINK NODE NUMBER: 74389

----- Original Message -----
From: "John Miller" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, June 11, 2004 8:33 AM
Subject: Re: COM PORT NOT AVAILABLE!!!


> Is the com port enabled?
> ----- Original Message -----
> From: "Anthony Vece" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Friday, June 11, 2004 8:06 AM
> Subject: Re: COM PORT NOT AVAILABLE!!!
>
>
> > Hi John;
> >
> > It just doesn't work at all.
> >
> > It not finding the com port.
> >
> > Anthony
> >
> >
> > ----- Original Message -----
> > From: "John Miller" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Friday, June 11, 2004 7:35 AM
> > Subject: Re: COM PORT NOT AVAILABLE!!!
> >
> >
> > > Does it work with the test when you first bring up the program? mine
> does
> > a
> > > check to make sure the radio is alright.
> > > ----- Original Message -----
> > > From: "Anthony Vece" <[log in to unmask]>
> > > To: <[log in to unmask]>
> > > Sent: Friday, June 11, 2004 2:59 AM
> > > Subject: COM PORT NOT AVAILABLE!!!
> > >
> > >
> > > > Hi Everyone;
> > > >
> > > > I recently purchased the ICOM T90A.
> > > >
> > > > I tried to use the software and no matter what com ports I choose
com
> 1
> > to
> > > > com 4, the message keeps telling me that the com port is not
> available.
> > > >
> > > > It tells me to check the cable, com port and, make sure the
> transceiver
> > is
> > > > turned on.
> > > >
> > > > Any ideas?
> > > >
> > > > Thank you in advance.
> > > >
> > > > 73 De Anthony W2AJV
> > > > [log in to unmask]
> > > > ECHOLINK NODE NUMBER: 74389
> > > >
> > >
> >
>