I've already started passing the file around and am getting rave reviews
that Brad should go professional.  Then the only vending machine he'll have
to worry about is the one distributing his CDs.  Heh-heh.

Paul the Promoter who wants 15% of all profits (not the Ezekiel kind either)
----- Original Message -----
From: "Helen" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, December 23, 2003 11:17 AM
Subject: Re: Brad's song remixed


> Chris, what a fantastic job you did in fixing the presentation of Brad's
song!
> Congratulations!  I just listened to it.  It is so clear, loud, and
> beautiful.  You and Brad and the Lord make a great team.  smile
>
> Helen
>
> At 08:29 PM 12/22/03 -0500, you wrote:
> >Guys.
> >
> >phil, if you want it let me know...  i've noticed a few people have
written
> >me off list and said that Brad's track was really soft...  Could I try to
> >fix it...  Well?  Gladly!  i did.  i added some normalization, and some E
Q
> >as well...  By this I mean:  there was far wayyyyy! to much mid range
> >frequency, so I cut some of it out, then i also boosted up the low
> >frequencies.  Then, I ran the track through my hardware quad4 effect
> >processor which has a killer! and believe me, I mean! killer! dynamic
> >condenser compresser in it so, needless to say:  my! gosh!  I have never!
> >thought that his track could sound so good!  i re encoded it to 192 kbs
> >stereo 16 bit 44100 hz.  it's an mp3 of corse...  o, one last thing:
Once
> >all was processed, I ran it to my minidisk recorder, and got the mix
> >recorded.  Then, i used the AB erase function on the recorder and cropped
> >the track so that the little bit of mike/tape hiss at the beginning
before
> >he starts is gone, now it's cut down to literally the tenth! of a frame
> >where he starts playing.  Then, i also did the same at the end of the
> >track...  Then, noticed that because of that, it got cut off very cold,
so I
> >faded out the last half a second of the track, thus giving a ver'r'ry
smooth
> >leadout.  once the final mix was done, then I ran it back! through my
board
> >again, my hardware mixer that is, back into my sound card, and back to
sound
> >forge.  Then rerecorded it, and Boom!  A complete masterpiece!  if any of
> >you all want this improvement, let me know and i'll send it to ya...
> >
> >
> >Chris.
> >msn or windows Messenger:
> >
> >[log in to unmask]
> >
> >E-mail:  [log in to unmask]
> >
> >AOL messenger:  gilland1981
> >
> >phone:  704-296-2184
> >
> >have a wonderful day!