Where is there a lot of PSK31 activity? I've been just trying to learn the
software before I go and use it but I guess later on today I'll try to use
it.
----- Original Message -----
From: "Steve Forst" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, October 13, 2004 9:15 AM
Subject: Re: digitalk help
> John,
>
> Can't help with the 2 sound card thing. I have 2 cards hear, but can't
> get
> the pc to recognize both at the same time.
>
> Anyway, you are aware that Digitalk does not need your screen reader to
> operate? It uses it's own voice so I find it less confusing to shut
> down
> jaws while running digitalk.
>
> Can you recieve a signal and get it to decode? Once again, simply
> starting
> the program, tuning to the desired freq and mode, and using the left and
> right arrow keys , you should lock onto a psk signal and the voice will
> start decoding it. Is your line in activated on the sound card? If you
> have mic activated for echo link or something else, the line in won't
> be
> getting any audio from your rig to decode.
>
> 73 Steve KW3A
> [log in to unmask]
>
> ----- Original Message -----
> From: "John Miller" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Wednesday, October 13, 2004 8:49 AM
> Subject: Re: digitalk help
>
>
>> I've had not much luck with digitalk yet but it's probably me, the lack
>> of
>> documentation is hugely to blame I think though it doesn't seem to like
>> my
>> computer much either, I wish I could get it to run on my 2nd sound card,
>> that might help a little.
>> ----- Original Message -----
>> From: "Steve Forst" <[log in to unmask]>
>> To: <[log in to unmask]>
>> Sent: Wednesday, October 13, 2004 8:40 AM
>> Subject: Re: digitalk help
>>
>>
>> > John,
>> >
>> > Digitalk is psk only. It's free and can be found at:
>> >
>> > http://www.qsl.net/kh6ty/digitalk.htm
>> >
>> > Depending on your os, there may be another file you will need to
> download
>> > from the site. I've also had some success with Digipan, another free
>> > one.
>> > Digipan isn't for the blind, as Digitalk is, but can work with JAWS.
>> >
>> > 73, Steve KW3A
>> > [log in to unmask]
>> > ----- Original Message -----
>> > From: "John J. Jacques" <[log in to unmask]>
>> > To: <[log in to unmask]>
>> > Sent: Wednesday, October 13, 2004 1:41 AM
>> > Subject: Re: digitalk help
>> >
>> >
>> >> Hi Steve and all. Whare can I download the program, I would like to
>> >> check it out with a Kenwood TS450. Also, is it multi-mode, or just
>> >> PSK31?
>> >>
>> >> Thanks:
>> >> John
>> >>
>> >>
>> >>
>> >
>>
>>
>>
>
|