Subject: | |
From: | |
Reply To: | |
Date: | Wed, 4 Aug 2004 00:59:08 -0400 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
XP will see the full size of the drive. There is also the option of using an
add-on controller card. The new Promise cards will enable the full size of
the drive.
William Pike
[log in to unmask]
-----Original Message-----
From: PCBUILD - Personal Computer Hardware discussion List
[mailto:[log in to unmask]]On Behalf Of Mary Boyes
Sent: Tuesday, August 03, 2004 10:43 PM
Subject: [PCBUILD]
Hi All
Just finished building my first PC. Had a lot of fun and it was a success
except for the hard drive partition. The drive is a Maxtor 160GB ultra
series. Windows only can partition up to 137GB so I can't use all the
storage on the drive.
I found the Maxtor support page on this problem and I downloaded sp1 and
then the Maxtor Big Drive Enabler. When I installed the Maxtor Big Drive
Enabler it said it was installed but when I went to device manager it said
the size of C is 131 GB but in the BIOS and under capacity in device
manager it is 160 and 156 GB. I am thinking that I need to have winxp with
sp1 before I format and downloading it after is not effective or am I doing
something wrong. Is there a way to get my C drive up to full capacity?
My motherboard is a ASUS P4S8X with a sis648 so I can't use the Intel fix.
I could get an Ultra ATA PCI adapter card if there is no other way and do
another winxp clean install. Although 137 GB is large enough I still would
like to have the use of all the storage.
Thank you
Mary boyes
PCBUILD's List Owners:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://freepctech.com
|
|
|