Subject: | |
From: | |
Reply To: | |
Date: | Tue, 30 Jul 2002 21:27:03 +1000 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
Sounds like you've done everything. There are only 2 things left, either
mobo or CPU. Can you get back to normal if you change the jumper back? If
so, don't change the jumper back yet, get in BIOS first, make sure
everything is ok, and set FSB to 133 in BIOS, this should work if the CPU is
good. If say, you can set the FSB to 133 and everything works fine (CPU at
1533mhz), then, try the jumper again, if you experience any problem, it
points to a bad mobo.
Jun Qian
----- Original Message -----
From: "Al Gurdcilani" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, July 30, 2002 4:31 AM
Subject: [PCBUILD] Newly Built PC Freezes
>
PCBUILD's List Owners:
Bob Wright<[log in to unmask]>
Drew Dunn<[log in to unmask]>
|
|
|