There are also some not available in VFO that are there in Memory so either
way, you're going to be pretty bad off if you count clicks eventually that
will bite you,  best way is to just learn the ones you might change from
memory or VFO, which ever you'll be in more and go with that.
----- Original Message -----
From: "Don Bishop" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Wednesday, May 05, 2004 9:08 PM
Subject: Re: menus on the thf6a


> Steve,
>
> Thanks for the tips.  I'll certainly remember to stay in vfo mode.  Also
sounds like a and b band may give you different resulting menu choices too.
>
> Don
>
> On Wed, 5 May 2004 20:53:17 -0400, Steve Dresser wrote:
>
> Don,
>
> I think you are on whatever menu you were when you exited.  The good news
> is that the radio emits a lower beep when you get to the beginning of the
> menus.  One other caution:  make sure your radio is in VFO mode when you
> access the menus.  Some menu items are unavailable in other modes, and
> you'll get very confused if you try to count clicks.
>
> Steve
>
> On Tuesday 5/4/04 02:19 Don Bishop wrote:
>
> >Sorry if these questions are obvious to many, but don't have any sighted
> >help around here.
>
> >Regarding menus, it looks like I need to change menu 9 to have the thf6a
> >see the pc cable.  So, when you enter the menu for the first time, are
you
> >positioned
> >on menu 1? In other words, do you click clockwise 8 time to get to menu
> >9?  Then, when you go into the menu again for whatever reason, do you
> >enter starting
> >at the beginning again or are you put back on the menu you accessed
> >last?  In this case, menu 9.
>
>
> >Thanks,
>
> >Don
>