Subject: | |
From: | |
Reply To: | |
Date: | Mon, 3 May 2004 07:43:47 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
would you mind providing some contact info, so that others actually can get
this device?
Simon
----- Original Message -----
From: <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, May 03, 2004 4:08 AM
Subject: talking swr meter
> A couple weeks ago someone put up a message concerning a talking swr meter
being
> made by Reny Simard in Canada. I ordered one of these with both the hf
and vhf
> modules and wanted to comment on it. The total cost including shipping
was $185
> U.S.
>
> The meter itself has no visual display. It is a metal box with antenna
and
> transmitter connections on the ends. It measures about 2 and 3/4 inches
long, 2
> and a quarter inches wide and 1 and 7/8 inches high. There is also an
eighteen
> inch long cable coming from the center of the box. This cable connects to
the
> speech synthesizer. This is how both the hf and vhf modules look. The tx
side
> 239 connecter is slightly flattened on ine side so you can determine which
side
> to attach which cable on. The speech synthesizer box looks a lot like an
old
> Echo Crick or Echo PC speech synthesizer. It is six inches long, about 3
and
> 3/4 wide and about 1 and 7/8 high. It has an ac adapter that plugs in to
the
> back along with the thin cable from the meter. There is also a hole to
use a
> screw driver to adjust the volume on the back. The front sports a power
button
> and a small light to indicate when power is on. The hf module covers
1.8-30 mHz
> and the vhf 30-200 mHz. It can be used with powers of up to 500w but is
> suggested to be used in the 50-120w range. The voice has a definite
French
> accent but is clear. Swr is announced to a single decimal place (1.3,
4.6, 2.5,
> etc.) up to ten. At ten or higher the unit simply beeps. I have found it
to be
> accurate and great for me as a total. Now I can finally do some antenna
> experimenting without fear of damaging my rig.
>
> Be aware that a connecting cable is not supplied with the meter. An
eighteen
> inch cable is suggested. I suspect Reny would make one up on request.
>
> The meter modules are metal and the synthesizer box is plastic.
>
> Reny tells me that he is planning to manufacture a uhf module for the
meter.
> Once you have the synthesizer box all modules fit that box so buying
additional
> modules is all that is required. The cost breaks out as $99 for the
synthesizer
> and $38 for each module with each ordering costing $10 for shipping.
>
> I very highly recommend this unit. If you turn it on and make changes
while
> transmitting it will continually provide swr readings without the need for
> pressing any buttons. To shut it up, either stop transmitting or turn it
off.
>
> The voice of the unit is male.
>
> Ok, I'm just jotting notes as I think of them. Sorry this is so
disjointed.
> I've been up for about 36 hours working on anthropology interview
transcripts.
> Time to crash <g>.
>
> Tom
>
>
> Tom Brennan KD5VIJ, CCC-A/SLP
> web page http://titan.sfasu.edu/~g_brennantg/sonicpage.html
>
|
|
|