BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Bob Tinney <[log in to unmask]>
Reply To:
Bob Tinney <[log in to unmask]>
Date:
Thu, 1 May 2003 16:54:21 -0400
Content-Type:
text/plain
Parts/Attachments:
text/plain (90 lines)
I've gotten so many requests for the menu file for the thf6a, I decided to
paste it in this message as the best way to get it to everyone.  This
message contains functions arranged by menu number

Bob Tinney, K8LR, [log in to unmask]

MENU FUNCTION number LIST

Menu No. Function, Selections, Default, Ref. Page

SCAN RESUME, 1, Scan resume method,
TIME: Time-Operated mode, CARRIER: Carrier-Operated mode,
SEEK: Seek and stop mode, TIME/CARRIER/SEEK, TIME, 27

M.GRP LINK, 2, Memory Group Link configuration, 0 1 2 3 4 5 6 7 8 9,
No Links, 24

MR METHOD, 3, Memory Recall condition, ALL BANDS/CURRENT BAND, ALL BANDS, 16

PROG VFO, 4, Programmable VFO frequency range, (A-band only), -,
See Reference Page 39

AUTO OFFSET, 5, Auto Repeater Offset function, ON/OFF, ON, 13

OFFSET, 6, Repeater offset frequency, 0.00 ~ 59.95 Mhz in steps of 0.05 MHz,
See Reference Page 12

TUNE ENABLE, 7, Permit use of the Tuning control when the keys are locked,
ON/OFF, OFF, 38

TX INHIBIT, 8, Inhibit the transmission, ON/OFF, OFF, 40

SP/MIC JACK, 9, Select the SP/MIC jack function, SP/MIC/TNC/PC, SP/MIC,
45 46

DTMF STORE, 10, Store DTMF numbers in  DTMF memories, -, No Data, 31

DTMF SPD, 11, DTMF tone transmission speed, FAST/SLOW, FAST, 32

TMF HOLD, 12, Hold the transmission for 2 seconds between DTMF key entries,
ON/OFF, OFF, 31

DTMF PAUSE, 13, The pause duration while transmitting DTMF tones,
100/250/500/750/1000/1500/2000 ms, 500 ms, 32

DTMF LOCK, 14, Disable DTMF transmission with keys, ON/OFF, OFF, 32

PWR-ON MSG, 15, Power-on message, 8 characters, HELLO!!, 39

CONTRAST, 16, LCD display contrast, 1:minimum ~ 16:maximum, 1~16, 8, 37

BAT SAVER, 17, Battery saver receiver shut-off period,
OFF/0.2/0.4/0.6/0.8/1.0/2.0/3.0/4.0/5.0 sec., 1.0 sec, 37

APO, 18, Automatic Power Off function, OFF/3O/60 min., 30 min., 36

KEY BEEP, 19, Beep function, ON/OFF, ON, 37

VOXonBUSY, 20, Allow VOX transmission when the receiver is busy, ON/OFF,
OFF, 42

VOX GAIN, 21, Set the VOX gain sensitivity,
0: least sensitive ~ 9: most sensitive, 4, 41

VOX DELAY, 22, Adjust the VOX delay time,
100/200/300/500/1000/1500/2000/3000 ms, 500 ms, 41

CALL KEY, 23, Select a function for the CALL key, CALL/1750 Hz,
CALL (TH-F6A), 1750 Hz (TH-F7E), 19

1750 HOLD, 24, Hold the TX status when a 1750 tone is transmitted, ON/OFF,
OFF, 13

BEAT SHIFT, 25, Shift the internal CPU clock frequency, ON/OFF, OFF, 37

BAR ANT, 26, Enable an internal bar antenna below 10.1 MHz,
ENABLED/DISABLED, ENABLED, 34

LANGUAGE, 27, Select the menu language
ENGLISH/JAPANESE, ENGLISH, 9

PACKET, 28, Select an external TNC packet speed,
1200/9600 bps, 1200 bps, 45

FM NARROW, 29, FM narrow band operation,
ON/OFF, OFF, 39

RESET?, 30, Select a reset mode,
NO/ VFO RESET/VFO/MENU RESET/FULL RESET, NO, 50

ATOM RSS1 RSS2