Hi,

I believe that the newer TV out cards using the NVIDIA chipset just have
to be hooked up to the TV before you turn the system on, for them to
output to the TV.

If you boot up on a monitor screen, I don't think there is a command to
switch from one to the other.  I may be wrong.  I use an EVGA, 64m,
mx440 and that is how it behaves for me, But I will check the properies
and see.

Thanks and have a Great Day!

Joe Lore

-------------------------------

Well, I have to go into Display Properties.... Settings....Advanced, and
then set the card for TV OUT. It won't do this automatically. I assume
you have to do something similar with your Gainward to tell it to output
to TV.

Rode
The NOSPIN Group
------------------

At 08:49 PM 7/9/03 -0700, you wrote:
>A little more information on my setup. If I connect my camcorder video
>output to my video input of the VCR all works fine. If I connect the
>video out from my Gainward card to the same VCR input, I get nothing.
>The question is this: do I have to do anything special to sent video
>out this video port on the video card? Unfortunately, the instructions
>that came with the card don't explain things very well. As it is, I can

>capture ok, but can't seem to send stuff back out.
>

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                   http://freepctech.com/pcbuild.shtml