Subject: | |
From: | |
Reply To: | |
Date: | Sun, 6 Jan 2002 06:59:44 -0800 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
I don't think this is the problem as I have used an external voice
synthesizer on Comm1. I thought perhaps reducing the 25-pin data cable to
a 9-pin for my serial port jack was the problem, but the only leads on the
TH-F6A end are from the mike/headphone jacks. Those few leads couldn't
multiply to 9 pins even. Perhaps the cable is bad or the adapter has gone
bad on me. I will try to investigate that.
73,
Dave
At 08:57 AM 1/6/02 -0500, you wrote:
>Remember that port assignments will vary depending on several things,
>including whether you have an internal modem, how it's configured, etc. In
>the past, at least, I know that if you had three ports actually defined (an
>internal modem, say, and two physical ports on the computer), you couldn't
>put anything on what would be port 3 until and unless both ports 1 and 2
>were in use ... that is, you couldn't assign a device to port 3 without
>having devices already using 1 and 2. The whole issue of COM ports can be
>really confusing.
>
>--
> Walt Smith - Raleigh, NC
> [log in to unmask]
|
|
|