Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 25 Sep 2002 13:46:43 -0400 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
I haven't had this sort of trouble with the newer 'snap-together' cases and
micro form factor boards, but when I built Pentium I systems years ago I
used plastic screws I found at Lowe's. They have matching fine and coarse
threaded plastic screws in the sizes commonly used on cases. If required, I
put one brass screw in to act as a ground.
Tom Turak
-----Original Message-----
From: Mom [mailto:[log in to unmask]]
Sent: Wednesday, September 25, 2002 11:11 AM
I am very proud to say that I did remember to do all the other things...
install continuity RIMMS, ensure power supply was marked 115V, etc. The
problem was that the mobo was grounded to the case. I had thought this
before, and loosened the screws, but it didnt help. This time, i completely
removed the mobo from the case, and voila! Fans are spinning, POST is
beeping at me (my video card wasnt in), and I was jumping all over the
place. A huge thanks to all of you who took the time to help me out. If I
could only ask one more thing... anyone know of a good product for me to
stick between mobo and case...?
THANKS A MILLION GUYS!!!!!!
Michael Hand,
successful builder
Visit our website regularly for FAQs,
articles, how-to's, tech tips and much more
http://freepctech.com
|
|
|