There should be a setting in the SCSI controller as to which device it might
boot from. If using an Adaptec controller, you press control-A to enter
their configuration mode. Look for a setting to designate the boot device as
well as allowing a CDROM to boot. It has been a while since I did this so I
may be overlooking something.
Peter
-----------------------------------------------
The NoSpin Group
[log in to unmask]
> -----Original Message-----
> I have not been able to find the method to have the SCSI
> CDROM as a boot
> device. I have tried to designate "SCSI" as the primary boot
> device in the
> BIOS but I still get an error message upon booting that there
> is no boot
>
> Jim Maki
> [log in to unmask]
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml