>1. Does it matter to a power supply which side is up?
>     It will mount either side up.
>     Top & bottom have no vents. Fan at each end.

Case's are usually drilled so a standard power suppy will fit in it only
one way.  It should not matter
if the power supply is upside down or not, based on your description.  What
may be of issue is the location of the cables coming out of the supply.
That may be better in one position than the other.


>2. Is it safe to say that any AGP card that fits the AGP slot
>     will be the correct voltage? The MB calls for 1.5V AGP card.
>     I have literature but can't find any voltage specs for my cards.
>     Old Rage 128 won't fit. Newer GeForce2 GTS does fit.


P4 Boards from intel will not use older AGP cards.  When you try and put an
older one in, it just won't fit.
You look at the board and you think they mounted the AGP slot backwards.
This is done on purpose.
If the Card fits - it will work, proper voltages will be applied.  It means
the card meets the specs.


God Bless America!

Joe Lore
MicroComputerCenter, Inc.
781-933-5530 / [log in to unmask]

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>