Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Wed, 14 Aug 2002 12:21:05 -0400 |
Content-Type: |
text/plain; charset="iso-8859-1" |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
If you use the "screwdriver under the cap" part, don't forget to connect a
clip lead from the screwdriver shaft to the chassis ground, or else you will
be dead when you stick the screwdriver in there. Connect the lead to ground
and the screwdriver FIRST, then put the screwdriver under the second anode
cap. There will be a small pop when the screwdriver tip makes contact with
the second anode (under the cap).
Better yet, if you're going to be doing this a lot, go buy yourself a high
voltage probe and use it to discharge the CRT. Remember that the second
anode will continue to build up a charge, so you need to leave the
screwdriver and clip lead in place.
----- Original Message -----
From: "Mike Whalen - The Computer Valet" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, August 13, 2002 1:41 PM
Subject: Decharging a monitor
> Hi.
>
> I will soon work on an all-in-one Compaq computer for some hard drive
> related matters.
>
> I've never dis-charged a monitor before and want to do this to
> minimize any risk to myself.
>
> I have a book that explains how to do it, at least the screwdriver
> under the cap part.
>
> Can anyone here offer any tips? Is it loud? Can I expect a shock?
> Should I put my tongue on the coil? (Just kidding on that last part.)
>
> --
> Cheers,
>
> Mike Whalen
> The Computer Valet
>
> E-Mail: [log in to unmask]
> Phone: (978) 670-5967
>
> >
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|
|
|