BLIND-HAMS Archives

For blind ham radio operators

BLIND-HAMS@LISTSERV.ICORS.ORG

Options: Use Forum View

Use Monospaced Font
Show Text Part by Default
Condense Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Content-Transfer-Encoding:
7bit
Sender:
Blind-Hams For blind ham radio operators <[log in to unmask]>
Subject:
From:
Mike Garrett <[log in to unmask]>
Date:
Sat, 25 May 2002 04:54:22 -0500
Content-Type:
text/plain; charset="iso-8859-1"
MIME-Version:
1.0
Reply-To:
Blind-Hams For blind ham radio operators <[log in to unmask]>
Parts/Attachments:
text/plain (42 lines)
That is my experience, too. I don't know how the coax length factors in, but
shortly after I put up my G5RV, I discovered that I had a lot more coax than
I needed to reach the feed point of the ladder line, so I snipped some out.
So I had to add it back. Now I have a small coil of coax at the shack end,
and it works okay again.

73. Mike, K9AZS
----- Original Message -----
From: "Louis Kim Kline" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Friday, May 24, 2002 8:17 PM
Subject: Re: need coax lenght please?


> Hi.
>
> I don't know what length is recommended, but I can tell you that the
length
> of the coax does influence how it tunes.  For example, I can't get on the
> upper end of 20meters or on 17meters with mine, but if I add a 6 foot
piece
> of coax that I have in the shack then it will load on both, but it won't
> load on the lower part of 10 meters.  While this seems like a nuisance, I
> have used this principle before to bring the antenna into the tuning range
> of my auto-tuner on various bands.
>
> 73, de Lou K2LKK
>
> At 01:01 PM 5/24/02 -0700, you wrote:
> >I don't think the length of the cabble is critical.  As I recall, mine
> >just said over 50 feet.  The one I got with my commercial antenna had a
> >current ballon at the feed line end of the rg8x cable.
> >73s
> >Butch Bussen
> >wa0vjr
>
> Louis (Kim) Kline, A.R.S.  K2LKK
> e-mail:  [log in to unmask]
> Work e-mail:  [log in to unmask]
> Work Tel.  (585) 697-5753
>

ATOM RSS1 RSS2