On 24 Feb 98 at 3:03, Mark and Judith Walter wrote:
> Maybe you should check out the settings for the CPU, 75MHz is not
> the standard setting, there is also a Cyrix PR200+MMX that runs at
> 2.5x66 . The 2.5x66 is a slightly faster part. Both the 2x75 and the
> 2.5x66 run at voltage settings of 2.8v~3.0v .
Cyrix has shipped 6x86MX PR200+ chips in both configurations.
2.5x66 runs the CPU a bit faster, and the bus a bit slower; overall
system speed should be roughly similar.
David G