On 22 Jan 2003, at 7:25, Russ Poffenberger wrote:
> A hub or repeater is your best bet, however you may be able to get away
> with using a patch panel approach, putting an RJ45 jack on the end of the
> cable, and an RJ45 plug on a length of cable to extend it, especially if
> there are currently no other patch panels involved.
On our network, we make crossovers by cutting an end off a standard
straight-through cable and putting a reverse-wired RJ-45 *jack* on the cut
end. You can do the same (without the reverse) to make an extension.
David Gillett
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml