Well, this is just for an HT, and someone suggested goig to BNC because
that is what I have in terms of other antennas around here, and only one
SMA for the THF6 obviously.
On Fri, 23 Aug 2002, Brett Winchester wrote:
> I suspect nothing is pre-made for bnc as that connector was not originally =
> designed for high level rf. Put a connecter on whatever antenna you need. =
> =20
>
>
>
> thank you!
>
> BRETT K WINCHESTER PM KD7JN VOLUNTEER & READING SERVICES MANAGER
> [log in to unmask] http://www.icbvi.state.id.us/brochur=
> e/RADIO.HTM=20
> Member IAAIS International Association of Audio Information Services
> IDAHO COMMISSION f/t BLIND & VISUALLY IMPAIRED - ICBVI
> P O BOX 83720, 341 W WASHINGTON, BOISE IDAHO 83720-0012
> 208-334-3220 ext 104 +7=3Dvoice mail after hours, Fax =
> 208-334-2963
>
>
> >>> JEFFREY MICHAEL KENYON <[log in to unmask]> 08/23/02 09:02AM >>>
> Right, but I am just wondering what is out there that has a BNC connector
> for HF that I could hook up to this unit? I use several different
> antennas for several different bands.
>
>
>
>
>
> On Thu, 22 Aug 2002, Brett Winchester wrote:
>
> > You will not get one antenna that will do all well, but you can get an =
> =3D
> > antenna that will do all poorly. Experience!
> >
> > thank you!
> >
> > BRETT K WINCHESTER PM KD7JN VOLUNTEER & READING SERVICES MANAGER
> > [log in to unmask] http://www.icbvi.state.id.us/broch=
> ur=3D=20
> > e/RADIO.HTM=3D20
> > Member IAAIS International Association of Audio Information Services
> > IDAHO COMMISSION f/t BLIND & VISUALLY IMPAIRED - ICBVI
> > P O BOX 83720, 341 W WASHINGTON, BOISE IDAHO 83720-0012
> > 208-334-3220 ext 104 +7=3D3Dvoice mail after hours, =
> Fax =3D
> > 208-334-2963
> >
> >
> > >>> JEFFREY MICHAEL KENYON <[log in to unmask]> 08/22/02 03:57PM >>>
> > ---------- Forwarded message ----------
> > Date: Thu, 22 Aug 2002 17:55:29 -0400 (EDT)
> > From: JEFFREY MICHAEL KENYON <[log in to unmask]>
> > To: [log in to unmask]
> > Subject: SMA to BNC on THF6A
> >
> > Hi everyone. Today I went out and bought a converter so that I can
> > connect a BNC antenna to the THF6A which you know is AMA, and I haven't
> > had thechance to experiment with the many BNC antennas I have, but I am
> > just wondering if anyone has any suggestions for an antenna that will =
> work
> > with all of the bands in cuding HF. Right now I have an antenna that is
> > from Radio Shack and it is teliscopic and it covers from 25 MHz to 1.3
> > GHz, but it does a better job on the lower freqs. Any thoughts would be
> > appreciated, and thanks in advance.
> >
>
|