Subject: | |
From: | |
Reply To: | |
Date: | Tue, 15 May 2001 07:00:01 +0100 |
Content-Type: | text/plain |
Parts/Attachments: |
|
|
The TMG707A will cover the 200MHz band, which is not available here in
the U.K.
73 de Dave G3YXX
In message <[log in to unmask]>, Louis Kim Kline
<[log in to unmask]> writes
>Hi Gary.
>
>Thanks.
>
>I found a used TS-790A at AES, and they still had a couple of the VS-2
>boards, so I ordered it and had them install the voice board.
>
>This will get me back on everything except 220 MHz, which is going to be
>rough. There wasn't much around that had voice on 220 MHz unless I can
>stumble across an Icom IC-375A with the voice board already in it. I'm
>probably going to be better off to try to put a transverter on my HF rig,
>and keep my eyes peeled for a Midland 13-509 for the FM part of the
>band. There aren't that many 220 repeaters in Rochester, NY that I
>couldn't make a crystal rig work.
>
>73, and thanks.
>
>Lou K2LKK
>
>At 04:56 PM 5/14/01 -0500, you wrote:
>>The ts 790 should take a vs-2, but the 811 I believe will have to have a
>>vs-1. the vs-1 can still be found but is much harder to find.
>>Gary Jackson KK5GE
>>----- Original Message -----
>>From: "Louis Kim Kline" <[log in to unmask]>
>>To: <[log in to unmask]>
>>Sent: Monday, May 14, 2001 4:54 PM
>>Subject: Looking for used UHF all-mode gear
>>
>>
>>Hi all.
>>
>>I am trying to locate a used UHF all-mode rig that will either accept a
>>currently available speech board like the Kenwood VS-2 board, or a radio
>>that already has a speech board. The problem that I am having is figuring
>>out which radios will adapt and whether the boards can still be gotten. I
>>know of a couple of sources of the Kenwood VS-2 board. Does anyone know if
>>the Kenwood TS-790 or the TS-811A took speech boards?
>>
>>Thanks.
>>
>>73, de Lou K2LKK
>>
>>
>>Louis (Kim) Kline, A.R.S. K2LKK
>>e-mail: [log in to unmask]
>>Work e-mail: [log in to unmask]
>>Work Tel. (716) 697-5753 (New number effective 5/7/01)
>
>Louis (Kim) Kline, A.R.S. K2LKK
>e-mail: [log in to unmask]
>Work e-mail: [log in to unmask]
>Work Tel. (716) 697-5753 (New number effective 5/7/01)
--
David
|
|
|