Hi Kevin,
I haven't tried messing with the tnc. May be a nice feature though.
73 Steve KW3A
----- Original Message -----
From: "Kevin Nathan" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, May 05, 2002 8:23 PM
Subject: Re: Kenwood TS-2000 Tips Please
> Hi Steve,
>
> K just found another key to hit and not do anything bad. You can press
the
> key to switch between vfo and memory twice and it will also read present
> frequency. Works great.
>
> Have you used the TNC or other features like that in the radio?
> Kevin, K7RX :)
>
>
> ----- Original Message -----
> From: "Steve Forst" <[log in to unmask]>
> To: <[log in to unmask]>
> Sent: Sunday, May 05, 2002 16:41
> Subject: Re: Kenwood TS-2000 Tips Please
>
>
> > Kevin, unless I am very mistaken about something it will not do both.
It
> is
> > an either / or situation. This is why I suggested you set the pf key to
> > read s meter and if you want to read freq, you hit enter key twice. You
> > could also hit the mode switch twice to toggle back to where you
started
> > and she will say "VFO 21.222" or whatever.
> > ----- Original Message -----
> > From: "Kevin Nathan" <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Sunday, May 05, 2002 5:24 PM
> > Subject: Re: Kenwood TS-2000 Tips Please
> >
> >
> > > Hi Steve,
> > >
> > > I need to change something apparently because when I set 51A to 64, it
> > gives
> > > me the s meter reading ok but on a second press it just shuts up and
> > doesn't
> > > read the frequency. What else do I need to set to get it to read
both?
> > >
> > > Thanks much and 73.
> > > Kevin, K7RX :)
> > >
> > >
> > > ----- Original Message -----
> > > From: "Steve Forst" <[log in to unmask]>
> > > To: <[log in to unmask]>
> > > Sent: Sunday, May 05, 2002 12:31
> > > Subject: Re: Kenwood TS-2000 Tips Please
> > >
> > >
> > > > Hi Kevin,
> > > >
> > > > Congrats.. Set menu 51 A to 64 so the front panel key reads s
meter.
> > Too
> > > > bad there is only 1 pf key on this rig. Hit enter twice to read
freq.
> > Or
> > > > you can get optional Kenwood mic which has a few more pf keys that
you
> > can
> > > > program.
> > > >
> > > > I also saw your post on the XMlog list. My ts-2000 works fine with
> the
> > > > standard Kenwood setting. It gets freq/mode and keys cw but i have
not
> > > > messed with packet spots.
> > > >
> > > > have fun. Steve KW3A
> > > > ----- Original Message -----
> > > > From: "Kevin Nathan" <[log in to unmask]>
> > > > To: <[log in to unmask]>
> > > > Sent: Sunday, May 05, 2002 1:34 PM
> > > > Subject: Kenwood TS-2000 Tips Please
> > > >
> > > >
> > > > > Hi All,
> > > > >
> > > > > Well, I have this little beauty home and running and have a couple
> of
> > > > > questions. First, the switch below the clear key left of the
tuning
> > > > knob--I
> > > > > think it's dsp--what does it do? I can't really tell any
> difference.
> > > > > Second, what do I need to do to get the S meter to read verbally?
> > > Someone
> > > > > sent me some info on this but it seems to have disappeared. I'll
> > > probably
> > > > > have more later but these for now.
> > > > >
> > > > > thanks all and 73.
> > > > > Kevin, K7RX :)
> > > > >
> > > > >
> > > >
> > >
> > >
> >
>
>
|