Steve, according to the manual, the only setting for the CPU is in the
AMIBIOS CPU PnP SETUP. It will automatically or you can use USER DEFINE.
When I use AUTO it sets it up at 100MHz which is the highest setting. I
have tried it both ways (AUTO & USER DEFINE) with the same results. When
I first installed this motherboard new, about a year and a half ago, it
had a 300MHz processor and it was reading 300MHZ on test. Somewhere down
the line it changed to 285MHz. When I installed the 350MHz it reads
333MHz. It seems somewhere it changed from 100MHz to 95 MHz. I am using
256MB of RAM.
Thanks
Joe
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml