I believe your case also snaps together - you need to apply inward pressure
at various points around the seam while you pull the pieces gently to allow
the parts to separate.  Sorry, I don't have a diagram with the exact spots.
I was able to open a 420 CDS a few weeks ago this way.  Similar to opening a
tv remote, etc.   I seem to recall a few hidden screws under plugs or covers
near the lcd panel hinge on the keyboard side as well.  Unfortunately, I
don't have the pc to check further.

James HIlls wrote:

> Subject: TOSHIBA Satellite Pro 400CDT
>
> Can anyone out there give me step by step instructions as to how to get
> into the case so I can reattach the ON/OFF button to the ON/OFF switch.
>
> I have found the seven(7) screws on the underside that appear to hold
> the
> two parts, keyboad/bottom, together but there is some another attachment
>
> that I have been unable to find.
>
> All assistance would be greatly appreciated.
>
> Thanks in advance.
>
> Jim Hills
> Houston TX
>
>             Do you want to signoff PCBUILD or just change to
>                     Digest mode - visit our web site:
>                    http://freepctech.com/pcbuild.shtml

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                  http://freepctech.com/downloads.shtml