On Tue, 14 May 2002 18:51:10 -0700 David Gillett
<[log in to unmask]> writes:
> On 14 May 2002, at 17:52, Demetri Kolokotronis wrote:
>
> > Should File and printer sharing for Microsoft Networks, Bindings,
> be
> > checked, if only share by LAN, and not by Internet?
>
> Yes -- if it's not checked, it won't be done AT ALL.
>
> There are three basic approaches to making it work on the LAN but
> not the Internet:
>
> 1. Bind it only to local interface(s). NT/2K/XP let you do that,
> 95/98/ME might not.
>
> 2. Bind it to a non-routable protocol (NetBEUI) and NOT to TCP/IP.
> (I've never gotten this to work, but others apparently have.)
>
> 3. Install a firewall or router on the Internet connection that
> blocks this service.
>
> In all three cases, though, it must be enabled on the PC.
>
> Dave Gillett
When I enabled TCP/IP protocol in Network, Configuration, Win98, TCP/IP
Dial-Up Adapter also enabled. File and printer sharing for Microsoft
Networks, Bindings, TCP/IP Dial-Up Adapter, was not checked. This was
checked in TCP/IP protocol. Checking binding in TCP/IP Dial-Up Adapter
made TCP/IP network work. However, MS dialog box "highly recommended"
disabling dial-up TCP/IP binding for security.
Is there a way to enable dial-up binding, but block sharing by Internet,
which I would not use? I do not understand Dave Gillett's no. 1. Also,
with TCP/IP, whichever computer starts second takes five minutes to bring
up icons in Network Neighborhood. Going one step higher in Network
Neighborhood takes another five minutes. Is there a fix for this
slowness? If can resolve TCP/IP security, is it better to use TCP/IP
instead of NetBEUI, even with this slowness?
Demetri Kolokotronis
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml
|