I don't believe you would fire-up your mobo with 133FBS, but been a while in
PC business, I've seen a lot of strange problems, and a lot of "sudden
death", really, everything could happen.
I see you've done everything, but I'm not sure about the CPU, I highly
recommend you test your CPU on other machine. I see half-half chance that
either CPU or mobo has failed.
Good luck.
Jun Qian
----- Original Message -----
From: "Jay Merritt" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Sunday, January 14, 2001 3:52 PM
Subject: [PCBUILD] System Crash - Bad Motherboard?
> Hi All,
> So far I have been unable to get it going again. I have replaced the video
> card with a new replacement from 3DFX and tried an old PCI 4 Meg card,
> removed and swapped positions of the Ram, cleared CMOS and reset BIOS,
> removed all cards, & removed all drives. I believe at this point the MOBO
> must be bad as I am running out of ideas. I understand the BE6 II is an
> Intel 440BX chipset, which is "Out of Specs" w/the 133 FSB speed I have
been
> running the system at. Is there a definitive way to check the MOBO. (I
don't
> have another Slot one processor to try in it.
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com
|