Phil,
I used to use a Spaulding HBX-56 which supported a tribander and a pair of
2-meter beams with no problems.
It is about 32-inches on a side and narrows to about 12 inches at the top
section. You need at least a 4 x 4 x 4 hole, so you'll need about 2 to 2.5
yards of cement.
As I recall, the Ham-m rotor fit in the top plate on that section, however,
the 64-foot version had a narrower section and I think the rotor had to be
mounted lower down.
Steve
k8sp
----- Original Message -----
From: "Phil Scovell" <[log in to unmask]>
To: <[log in to unmask]>
Sent: Tuesday, April 30, 2002 6:45 PM
Subject: free standing towers
Anyone have a recommendation for free standing towers over 50 feet? I am
going to have to take down my 65 foot tower in my backyard that's far from
the house because my son is going to build a house back there. So I am
going to finally get a free standing tower to have up near the back of the
house and will finally get away from super long feed lines.
Phil.
k0nx
Aiming For The Stars
http://www.AimingForTheStars.com