> After doing some testing, I am almost convinced that the new 300W P/S is defective.
G'day again Paul, - nice to hear from you.
I just wonder if the P/S is inadequate, (even if in a very small way) rather than defective ? - although I do believe that Enlight is a reputable manufacturer.
The ASUS manual, p.42, (3.19) quite definitely states;
" IMPORTANT : Make sure that your ATX power supply can supply at least 10mA on the +5 volt standby lead (+5VSB). You may experience difficulty in powering ON your system if your power supply cannot support the load. "
I guess this points to two things;
a/ When all else fails; - read the instructions. :-)
b/ Now I'm a bit worried about having bought an 'el cheapo' case and P/S.
I did the latter because I thought it best to buy the best possible mobo. and save money elsewhere, but in retrospect, possibly not the best idea.
The truth is that I'm a bit lost when it comes down to milli-Amps.and such, although I do know that systems such as we are building can generate as much as 60-70 Watts, which is as much as a small light-bulb, and we know how hot those little things can get.
I do agree though that 300W is the minimum P/S, - perhaps it's an an absolute minimum for systems such as ours ?
A lesson I learned during my petrol-head, hot-rod building youth, was to always check and double-check the simple and obvious things. I once stripped and rebuilt a carburettor, only to find that the real problem was that I had installed the fuel filter backwards ! Although it's unlikely, - this lesson would lead me to check that the front panel switch is actually working properly.
Hopefully, you will have solved the problem by the time you read this, - and I'll keep my fingers crossed when I do my bare-bones power- up.
Oh, and by the way, there is nothing in my manual which says anything about pushing the power button twice, - just Soft Off / Power Off for 4 seconds.
Kevin,
Auckland, NZ.
My other 250W P/S operates just fine connected to my old mobo or separately with the two pins jumpered. However it does not work with the new A7V133! As I mentioned in my post, the fans come on for about 1/4 revolution and shut off. The onboard LED stay lit with either P/S, however. It is possible that it is underpowered for the new board, which is supposed to be used with a 300W min P/S. It seems to function normally with my old mobo, however. Except that since I tried my old video board and P/S on the A7V133, and reinstalled them in my old computer, I can't get it to go into POST now! Great fun...........!! I hope the A7V133 is not defective.
>
> Please let me know what you experience in your computer building adventure.
>
> Have a great day!
> Paul M. Stoops
> Principal Engineer
> Manufacturing Research and Development
> Boeing Commercial Airplane Group
> (253) 931-5917; (253) 931-2815 FAX; M/S 5H-23
> E-Mail: [log in to unmask]
>
> Every day should be a special day:
>
> "For this is the day that the Lord has made.
> Let us be glad and rejoice in it"
>
>
> > ----------
> > From: Kevin Neal[SMTP:[log in to unmask]]
> > Sent: Sunday, August 19, 2001 5:31 AM
> > To: Stoops, Paul M
> > Subject: ASUS A7V133 Power Up Problem
> >
> > Paul,
> >
> > I'm interested in your problem as I'm building an almost identical
> > system, - although I haven't got quite as far as you have just yet.
> >
> > I was hoping to do a bare-bones boot this weekend, ( MBD. CPU. Video
> > Card, monitor and keyboard, - drives not installed ) - but a bad dose
> > of the flu has left my thinking processes a bit fuzzy.
> >
> > Looking at the ASUS manual, I wonder if the problem isn't in the ' Dual
> > Function Power Button ' - presumably the 'Soft Off' works in reverse ;
> > are you holding the button for 4 seconds ? (see page 11 of the manual)
> >
> > Anyway, I'm interested in your experience as we may both encounter
> > similar problems along the way.
> >
> > Kevin,
> > New Zealand.
> >
The NOSPIN Group Promotions is now offering
Mandrake Linux or Red Hat Linux CD sets along
with our NOSPIN Power Linux CD... at a great price!!!
http://freepctech.com/goodies/promotions.shtml
|