When I run into this problem I just format the drive (without the
/S) and then SYS the drive.  Just make sure the SYS.com file is on
your boot floppy.

- Wayne Copeland

>>> [log in to unmask] 10/24/01 10:48:53 PM >>>
You may still have some luck by manually loading the himem.sys &
emm386.exe
on your floppy.
The easiest way to configure this is to use the memmaker utilities.
 If you
have to you can use the
version from 6.xx msdos, just replace the himem.sys & emm386.exe
with win9x
versions. Once
you've done this you should be able to format the HD.

Rick Quilhot
-----Original Message-----
Booting from Win 95 osr 2 floppy downloaded from freepctech.  Goes
through the usual chain of format questions after using "/s"
switch, and
then comes back with the "insufficient memory" response when it
tries to
format.

 > what are you booting from, a floppy or the harddrive?
> If you booting from the harddrive, you might have to manually
load (in
> config.sys)
> the memory management himem.sys & emm386.exe.
> Rick Quilhot
<snip>
> Computer slowed down badly when 98 SE was installed by another
friend of
> his.  There's about 80 meg left on hard drive.  My personal
feeling is
> that computer is working too hard with Win 98.  I'm trying to
reinstall
> 95 osr 2 on it and create a partition for swap file.  When I try
to
> format it, I get "insufficient memory to load system files."
What am I
> doing wrong?
>
> Art Cassel

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                   http://freepctech.com/pcbuild.shtml

            Do you want to signoff PCBUILD or just change to
                    Digest mode - visit our web site:
                   http://freepctech.com/pcbuild.shtml