>The reason winipcnf may not display your settings is the first adapter
it
>displays is 'PPP adapter'. Use the drop down arrow to select your hardware
>adapter.
I have seen situations with SMC NICs where TCP/IP is reported as bound to
the adapter in config, but does _not_ show up in winipcfg.
My work around for that was to unbind TCP/IP, install it manually (which
would rebind it.)
Cheers,
Mike Whalen
Do you want to signoff PCBUILD or just change to
Digest mode - visit our web site:
http://freepctech.com/pcbuild.shtml