Sounds familiar!
I replaced my memory module and the problems disappeared. If you can beg or
borrow a module temporarily, you can eliminate this possibility.
Good luck!


On Sun, 20 May 2001 08:58:29 -0500, PCBUILD - Personal Computer Hardware
discussion List wrote:

>  The PC i am putting together is SOYO k7TA-B Socket A Motherboard with 800
Mhz duron Processor, 20 Gig Western /digital Protege Harddrive,128sdram pc
100
>
>  The problem is that when i try to install Win Me i get error at 10% of
installation SU0235, in microsoft database this means that the cd rom itself
must be damaged dirty or scratched. Or the Cdrom drive itself maybe
defective.
>  i have tried different  drives also have tried a new one also and
everytime the installation stops at 10 %.
>
>  So i reformatted the drive using western digital setup disk, and tried
windows 98 this installs all the way but when i try to access anything in
win 98 errors come up,and protection errors . And asked to shut down. i have
replaced the cables i have ran diagnostic on the hardrive(works fine) and
still can't figure this out. Could it be the motherboard? Help would be
appreciated.
>
>          The NOSPIN Group provides a monthly newsletter with great
>         tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
>             Visit our web site to signup: http://freepctech.com





_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/

         PCBUILD maintains hundreds of useful files for download
                     visit our download web page at:
                  http://freepctech.com/downloads.shtml