Content-Transfer-Encoding: |
7bit |
Sender: |
|
Subject: |
|
From: |
|
Date: |
Sun, 6 May 2001 11:45:41 -0400 |
Content-Type: |
text/plain |
MIME-Version: |
1.0 |
Reply-To: |
|
Parts/Attachments: |
|
|
Response doesn't quote post referred to, perhaps an old post. Questions:
> MAKE SURE HARD DISK DRIVE TYPE IS SET TO "Auto"
On hard drive? I haven't seen that.
> Make sure the IDE cable(s) are inserted all the way AND NOT REVERSED!
I haven't heard of a hard drive cable having the possibility of being
reversed.
> Under PCI configuration, make sure "Resources controlled by" is set to
"Auto" .
"PCI Bus", System Devices, Device Mgr, Win98?
> Also under PCI configuration, make sure "Reset configuration data" is
Disabled" .
Where, Win98?
Demetri Kolokotronis
On Sun, 6 May 2001 08:51:37 -0500 RJA <[log in to unmask]> writes:
> That's the normal message the Award BIOS gives during PC bootup. But,
> if it does'nt go any further, that's the telltale that the PC locked
> up.
>
> 1. Make sure the IDE disk drives are jumpered correctly (bootable
> HDD on master)
>
> 2. (probably available) MAKE SURE HARD DISK DRIVE TYPE IS SET TO
> "Auto"
> and MAKE SURE HARD DISK DRIVE MODE IS SET TO "AUTO" (under standard
> CMOS setup)
>
> 3 Make sure the IDE cable(s) are inserted all the way AND NOT
> REVERSED! (The usual telltale that the IDE cable is reversed is that
> the HDD LED stays continuously lit.)
>
> 4. Under PCI configuration, make sure "Resources controlled by" is
> set to "Auto" .
>
> 5. Also under PCI configuration, make sure "Reset configuration
> data" is "Disabled" .
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
The NOSPIN Group provides a monthly newsletter with great
tips, information and ideas: NOSPIN-L, The NOSPIN Magazine
Visit our web site to signup: http://freepctech.com
|
|
|