It seems that the NefSurf hub may have been the problem.  Our system
administrator replaced it with a 5 port Netgear switch and the hardware
seems to work fine now.  We can log in the computer to the Novell network
and view the web cam output from within the local network.  We are waiting
on either our paid network engineer or the ISP to "bridge" the camera's IP
to an outside address.  We should have this done on Wednesday morning.  Not
a lot of spare time since there is a live test scheduled for Wednesday
afternoon and the conference starts Wednesday evening.

Thanks!
Ron Jobe

----- Original Message -----
From: <[log in to unmask]>
To: <[log in to unmask]>
Sent: Monday, August 06, 2001 3:14 PM
Subject: Re: [PCBUILD] How does a additional hub affect a Novell network?


>   Okay, this eliminates the hub/wiring as the culprit.
>
> > We were able to access the web cam from within the local network,
> > but not from outside.
>
>   I'd say the address settings on the camera are the next things to
> check.  Local access but not remote sounds like it's either (a) not
> trying the right gateway, or (b) not trying the gateway when it in
> fact should.
---snip---
>
> David Gillett
>
>
> On 5 Aug 2001, at 16:49, Ron Jobe wrote:
>
> > The hub is a Netsurf 8-port, 10 Mb, Ethernet hub, model NC-N8PHub-R.  I
---snip---
> >
> > Thanks!
> > Ron Jobe
> >
> > ----- Original Message -----
> > From: <[log in to unmask]>
> > To: <[log in to unmask]>
> > Sent: Sunday, August 05, 2001 1:40 PM
> > Subject: Re: [PCBUILD] How does a additional hub affect a Novell
network?
> >
> >
> > > On 3 Aug 2001, at 18:20, Computers a la Carte wrote:
> > >
> > > > There is only 1 Ethernet line running into the worship center, so
> > > > I disconnected that line from the computer and installed a small
> > > > hub.  The hub's up-link port was connected to the incoming line.
---snip---

                         PCBUILD's List Owners:
                      Bob Wright<[log in to unmask]>
                       Drew Dunn<[log in to unmask]>